(317) 220-8468

Smart Press

SFM’s automated die press machine allows for multiple planks to be loaded and a conveyor system that continually feeds each plank into the machine.  With 200 tons of cutting pressure, this machine can make quick work of nearly any job.  The Smart Press is the ideal solution for high productivity die cutting for many industries and works for PE,EPE, PU, XLPE & EVA Foams.  It has a platen size of  51’’W  x 35’’L so you can work with full size planks and eliminate the step of cutting them down to fit smaller presses.

SP-200T14090ASP-200T16090ASP-250T160130ASP-250T160105A
Max. cutting width (1)mm
Inch
1290
51
1450
57
1450
57
1450
57
Max. cutting depth (2)mm
Inch
900
35
900
35
1200
47
1050
40
Overall dimensions
w/ conveyor
mm
Inch
5800 x 3100 x 1830
232 x 123 x 72
5800 x 3300 x 1830
232 x 131 x 72
10676x 3400 x 2482
420 x 134 x 98
6581 x 3844 x 2063
259 x 151 x 81
WeightKg.
lbs.
9500
20900
11000
24200
13750
30250
12000
26400
Machine tonnage200 tons200 tons250 tons250 tons
Full cycle time (3)5-10 seconds5-10 seconds5-10 seconds5-10 seconds
Compressed air requirement90 - 100 psi90 - 100 psi90 - 100 psi90 - 100 psi
Electrical requirements (4)480V, 3PH, 5Wires
AWG6, 50/60HZ
480V, 3PH, 5Wires
AWG6, 50/60HZ
480V, 3PH, 5Wires
AWG6, 50/60HZ
480V, 3PH, 5Wires
AWG6, 50/60HZ
Electrical power capacity33.5KW33.5KW39KW33.5KW
(1) (2) Max. cutting width and depth are max. dimension of die board
(3) material and tool size dependent. Measured with 2" thick. 1.7 PCF extruded PE, the time doesn't include loading or set up time.
(4) This is the standard electricity configuration, can be customized for your machine.

Our Address

2040 S Lynhurst Dr Suite D
Indianapolis, IN 46241