(317) 220-8468

Manual Press

SFM’s manual die press machine uses 150 tons of cutting pressure to cut PE, EPE, PU, XLPE, and EVA foams. Equipped with a two-sided working station, it can be used for different jobs or the same to improve productivity. This manual press has a platen size of 45” W X 28” L and can run up to 4” thick material at 6 pcf.

MP-150T14090DMP-150T14090EMP-150T14090DE
Max. cutting width (1)mm
Inch
1400
51
1400
51
1400
51
Max. cutting depth (2)mm
Inch
900
35
900
35
900
35
Overall dimensionsmm
Inch
3270 x 2300 x 1540
129 x 91 x 61
5500 x 2300 x 1540
216 x 91 x 61
6500 x 2300 x 1540
256 x 91 x 61
Weightkg
lbs.
7500
16500
7500
16500
8000
17600
Machine tonnage150 tons150 tons150 tons
Full cycle time (3)6-12seconds6-12seconds6-12seconds
No. of station212
Electrical requirements (4)480V, 3PH, 5Wires AWG6, 50/60 HZ480V, 3PH, 5Wires AWG6, 50/60 HZ480V, 3PH, 5Wires AWG6, 50/60 HZ
Electrical power capacity25KW25KW25KW
(1) (2) Max. cutting width and depth are max. dimension of die board
(3) material and tool size dependent. Measured with 2" thick. 1.7 PCF extruded PE, the time doesn't include loading or set up time.
(4) This is the standard electricity configuration, can be customized for your machine.

Our Address

2040 S Lynhurst Dr Suite D
Indianapolis, IN 46241