Smart Cutter

Tired of using a slow and dangerous bandsaw?  Our Smart Cutter is designed for cutting PE, EPE planks or rolls to the desired size in a matter of seconds.  This machine has three functions:  1.) Slitting the length.  2.) Cross cutting.   3.) Slitting and cross cutting in a single pass (no longer need to pre-cut or take multiple passes through a band saw to make a foam pad). Work with ¼” to 3.5” T X 3.5” – 51” W X 2” or larger lengths.  

SC-5104CSC-6004C
Max. material width(1)mm
Inch
1500
60
1500
60
Max. cutting width (2)mm
Inch
1210
48
1500
60
Overall dimensions
w/ conveyor
mm
Inch
4360 x 2540 x 1670
172 x 100 x 66
5020 x 2920 x 1700
198 x 115 x 67
Weightkg
lbs.
2500
5500
2600
5720
Feeding speed (3)mm/s
Inch/s
350
13
350
13
No. of circular blades (4)88
Cross cut typeGuillotineGuillotine
Compressed air requirement90 - 100 psi90 - 100 psi
Electrical requirements (5)220V, 3PH, 4Wires
AWG8, 50/60HZ
480V, 3PH, 4Wires
AWG8, 50/60HZ
Electrical power capacity8.5KW8.5KW
Recommended material(6)PEPE
Operator safetyAll blades are contained inside of the machine housing and an operator safety cage is located at the exit point (exiting conveyor option available).
Machine CapabilityCutter CCutter CXCutter CXD
Density
Pcf
Material Thickness(Nom)
Inch
Min. Slitting Width
Inch
Cross Cut Tolerance
Inch
PE≤1.7[3 - 3.5]8±1/8YYY
[2.5 - 3]6±1/8
[2 - 2.5]4±1/8
[0.5 - 2]3.5±1/8
2.2[3 - 3.5]16±1/8
[2.5 - 3]8±1/8
[2 - 2.5]6±1/8
[0.5 - 2]3.5±1/8
4[1.5 - 2]10±1/8
[0.5 - 1.5]8±1/8
6[0.5 - 1]6±1/8
EVA / XLPE≤2.2[1 - 2]8±1/8N/AYY
[0.5 - 1]3.5±1/8
4[0.5 - 1]8±1/8
60.58±1/8
PUCase by case results - SFM will test your material upon request(7)N/AYY
HoneycombCase by case results - SFM will test your material upon request(7)N/AYY
(1) (2) Max. cutting width and thickness are material dependent. Measured with 1.7 PCF extruded PE cushion.
(3) Material dependent. Measured with 2" thick, 1.7 PCF extruded PE .
(4) Circular blades used for slitting.
(5) This is the standard electricity configuration. Can be customized for your machine.
(6) Cutter CX is not able cut soft PU(Less than 30ILD). Send samples to SFM to verify before ordering.
(7) Due to each manufacturer might using different grade of paper- Send samples to SFM to verify before ordering.

Our Address

2040 S Lynhurst Dr Suite D
Indianapolis, IN 46241